Replacing brake pads and discs - you can do it yourself

Brake system car – one of the most important. In front of it there is only the engine and gearbox, because the car will not move without them. And if it starts moving, then you need to think about how to stop later. You will have to brake – the end of the road, a traffic light, an unexpected obstacle. Sometimes incidents happen – the car does not want to stop. The reasons are different – ​​the pipes can rot, the pads can wear out or the caliper can jam. The latter is dangerous – the car can spin out at speed. To prevent this from happening, the brakes need to be checked. The condition of the pads and discs can be assessed visually. But it is better to drive into a pit or lift.

As a rule, maintenance of the brake system consists in replacing pads, discs, developing calipers, and adding technical fluid. In modern cars, you can find out about the need for procedures according to the readings of the on-board computer. But whether to do it yourself or go to the service station is already a question. If drivers used to cope, now it's a different time. Often, there is no desire to mess around, and there are not enough skills. But sometimes the prices seem so high that you want to do it yourself. And some like it - reboot after office or other monotonous work. How to change brake pads and discs correctly, they will tell in the video of the “this is avby” channel.